Replace Bathtub Faucets: Avoid The Traps Get Expert Advice
Imagine a homeowner soaked completely in a bathroom remodel project. What do
you think feature high on his list of priorities? Apart from addressing routine
problems like clearing clogged drainage, he is sure to focus on infusing both
style and substance into this stolid part of his home.
So he makes an earnest effort to remove all traces of quotidian drabness from
the floor of the space, replacing it with a more eye-catching pattern and
sending the glam quotient soaring in the bargain.
Installing a stunning new shower faucet bearing the signature stamp of hallowed
manufacturers like Moen, Delta or Pegasus manages to burnish the aura of the
brass handles of the spout faucet fixed on the sink. Plumbing contractors are
summoned urgently with a boatload of supplies to lift the specters of other
leaking fixtures like water heaters valves.
“Mission accomplished”, exults the owner, little realizing that he has
sequestered one very important aspect to the corner. Can one discount the
colossal impact of that good old Roman bathtub faucet?
It is sad, but most homeowners turn a blind eye to not only routine bathtub
pipes and tub faucet repair, but also become utterly tone deaf when the
contentious issue of trying to replace bathtub faucets is broached.
Despite being used several times a day, I am completely bemused at the
nonchalance that how to replace bathtub faucets elicits.
It’s More Than Faucet Repair
Bathtub faucet repair forms just one miniscule part of the intricate world of
tub faucets. There are several styles and designs with which these fixtures
manage to impress the connoisseur in you.
If all things ancient fascinate you, then tub faucets with separate handles for
hot and cold water are sure to take you on a trip down memory lane. There are
however, several hi-end faucets that touch new levels of functional exuberance
and finesse that are certain to make you completely delirious with joy. These
new-age single-handle faucets are fitted with cartridges, in place of those
primitive washers, that drench you with a decadent mix of both hot and cold
water.
In addition, there are also Roman tub faucets and the more regular ones that
tend to jut out of the wall above the bathtub. You may have some trouble trying
to decide between the two, but there are no binary perceptions about the fact
that you must invest in a fixture that boasts of exceptional quality. It may
drain of your finances, but the investment will definitely be worth it.
What’s The One In Your Bathroom?
Before you actually get down to the business of replacing that bathtub faucet,
it’s important to familiarize oneself with the structure and composition of
each. You can have either a two-handle compression faucet or a single-handle
washerless faucet. Either way, you will have to address the issue of a worn-out
cartridge in order to bring about some semblance of order in your bathroom and
life.
Who Needs A Plumbing Professional?
It may sound completely absurd, but the fact remains that a leaking, worn-out
faucet can be replaced for less than $100. That startling figure includes the
cost of special tools and replacement parts available at Home Improvement
Centers. The best part is that this job does not call for any kind of previous
experience.
There are also several kinds of problems that plague bathtub faucets. While some
homeowners may have to deal with certain degree of corrosion on the spout that
ruins its finish, many have to contend with a damaged diverter or even cracks
between the piping and faucet spout that results in constant leaks inside the
wall.
A cursory glance under the spout will tell you what kind of bathtub faucet it is
– if you find a screw, then it is a slip-on spout, or else it is a screw-on
type.
Get Your Tools Ready
Here’s what you will require in your fight against the recalcitrant faucet:
- A Philips or flathead screwdriver, depending on the faucet
- Pipe thread seal tape or pipe joint compound.
- Caulk gun and caulk.
- A slip-on type of spout will also require a hex wrench
It Time To Launch A Full-On Attack
Here is what you need to follow in order to put an end to this niggling problem:
- Before you begin tinkering with the faucet, make sure you cut-off the water supply to the bathroom.
- Turning the pipe counterclockwise, remove this part completely. A slip-on spout will require the assistance of a screwdriver to take off the screw that keeps the faucet in place. Once the screw is off, separate the spout from the copper pipe cautiously.
- Loosen the screw on the new spout, then slide it on and tighten the screw, in case you have a slip-on spout. A screw-on spout will require you to determine the kind of pipe that is installed. While a copper pipe calls for the installation of a new spout by cutting-off the thread, in case of a steel one, you will have to discard the old pipe for a brand new one.
- Screw the new faucet on by turning it clockwise.
- Apply caulk between the new bathtub faucet and the shower wall. Allow the caulk to dry for 24 hours before you enjoy your brand-new faucet.
Now, it’s time to let unbridled joy to take over.